Basic requirements for Material and Flange


Material
Test basis / Requirements
Delivery Condition
 C 22.8 (1.0460)  DIN 17243: 01.87 + VdTUEV - WB 350/3: 2009 DIN 17243: 01.87 VdTÜV - WB 350/3: 2009
 +N
 P250GH (1.0460)  DIN EN 10222-2: 04.2000 National Annex
 +N
 P245GH (1.0352)  EN 10222-2:1999-12 + AC : 2000-02
 +N
 A105N / C21  ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04 + VdTUEV399/3: 1996-09 + NACE MR 0175: 2000
 +N
 A105N  ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04 + NACE MR 0175: 2000
 +N
 C21 (1.0432)  VdTUEV - WB 399/3: 1996-09
 +N
 RSt 37-2 (1.0038)  DIN 17100: 1980-01
 +N
 S235JR (1.0038)  DIN EN10025-2: 2005-04
 +N
 16Mo3 (1.5415)  DIN EN10222-2:1999-12 + AC:2000-02
 +N
 WStE355 / TStE355 (1.0565 / 1.0566)  DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06
 +N or QT
 P355NH  (1.0565)  DIN EN10222-4: 1998 + A1: 2002-12
 +N
 WStE355 / P355NH (1.0565)  DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06 + DIN EN10222-4: 1998 + A1: 2002-12 + DIN EN17103 :1989-10 + DIN EN10222-4: 1998 + A1: 2002-12
 +N or QT
 1.4301 (X5CrNi17-10)  DIN EN10222-5: 2000-02
 +AT
 1.4306 (X2CrNi19-11)  DIN 17440:1996-09
 +AT
 1.4401 (X5CrNiMo17-12-2)  DIN EN10222-5: 2000-02
 +AT
 1.4404 (X2CrNiMo17-12-2)  DIN EN10222-5: 2000-02
 +AT
 1.4432 (X2CrNiMo17-12-3)  DIN EN10222-5: 2000-02
 +AT
 1.4541 (X6CrNiTi18-10)  DIN EN10222-5: 2000-02
 +AT
 1.4571 (X6CrNiMoTi17-12-2)  DIN EN10222-5: 2000-02
 +AT
 1.4541 / F321  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
 1.4571 / F316Ti  DIN EN10222-5: 2000-02 / +ASTM A 240
 +AT
 1.4404 / F316L  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
 1.4306 / F304L  DIN 17440.1996-09 / +ASTM A 182/A 182M : 2005
 +AT
 1.4307 / F304L  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
Flange
Test basis / Requirements
 DIN, Carbon Steel  DIN2519:1991-06 + AD2000-W9: 02.04; -W13/ TRD107;TRB100; + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN, corrosion-resistant Steel  DIN2519:1991-06 + AD2000-W9: 02.04; -W2; -W10 / TRD107; TRB100; + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Carbon Steel  DIN EN 1092-1: 2008-09 + AD2000-W9; -W13/TRD107;TRB100 + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Stainless Steel  DIN EN 1092-1: 2008-09 + AD2000-W9; -W2; -W10/ TRD107; TRB100 + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 ANSI  ASME B16.5:2003 ASME B16.47:2006
On the other hand, plastic is more feasible for use in the home because of its reasonable price and easy installation. The materials used for flanges are under the designation of the American Society of Mechanical Engineers. Requirements are valid for normal situation, in special you have to contact us to introduce.
Material
Test basis / Requirements
Delivery Condition
 C 22.8 (1.0460)  DIN 17243: 01.87 + VdTUEV - WB 350/3: 2009 DIN 17243: 01.87 VdTÜV - WB 350/3: 2009
 +N
 P250GH (1.0460)  DIN EN 10222-2: 04.2000 National Annex
 +N
 P245GH (1.0352)  EN 10222-2:1999-12 + AC : 2000-02
 +N
 A105N / C21  ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04 + VdTUEV399/3: 1996-09 + NACE MR 0175: 2000
 +N
 A105N  ASTM A105/A105M-05/ ASME BPVC Sec.2 Part.A:04 + NACE MR 0175: 2000
 +N
 C21 (1.0432)  VdTUEV - WB 399/3: 1996-09
 +N
 RSt 37-2 (1.0038)  DIN 17100: 1980-01
 +N
 S235JR (1.0038)  DIN EN10025-2: 2005-04
 +N
 16Mo3 (1.5415)  DIN EN10222-2:1999-12 + AC:2000-02
 +N
 WStE355 / TStE355 (1.0565 / 1.0566)  DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06
 +N or QT
 P355NH  (1.0565)  DIN EN10222-4: 1998 + A1: 2002-12
 +N
 WStE355 / P355NH (1.0565)  DIN EN17103 :1989-10, + VdTUEV-WB 354/3 : 2001-06 + DIN EN10222-4: 1998 + A1: 2002-12 + DIN EN17103 :1989-10 + DIN EN10222-4: 1998 + A1: 2002-12
 +N or QT
 1.4301 (X5CrNi17-10)  DIN EN10222-5: 2000-02
 +AT
 1.4306 (X2CrNi19-11)  DIN 17440:1996-09
 +AT
 1.4401 (X5CrNiMo17-12-2)  DIN EN10222-5: 2000-02
 +AT
 1.4404 (X2CrNiMo17-12-2)  DIN EN10222-5: 2000-02
 +AT
 1.4432 (X2CrNiMo17-12-3)  DIN EN10222-5: 2000-02
 +AT
 1.4541 (X6CrNiTi18-10)  DIN EN10222-5: 2000-02
 +AT
 1.4571 (X6CrNiMoTi17-12-2)  DIN EN10222-5: 2000-02
 +AT
 1.4541 / F321  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
 1.4571 / F316Ti  DIN EN10222-5: 2000-02 / +ASTM A 240
 +AT
 1.4404 / F316L  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
 1.4306 / F304L  DIN 17440.1996-09 / +ASTM A 182/A 182M : 2005
 +AT
 1.4307 / F304L  DIN EN10222-5: 2000-02 / +ASTM A 182/A 182M :2005
 +AT
Flange
Test basis / Requirements
 DIN, Carbon Steel  DIN2519:1991-06 + AD2000-W9: 02.04; -W13/ TRD107;TRB100; + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN, corrosion-resistant Steel  DIN2519:1991-06 + AD2000-W9: 02.04; -W2; -W10 / TRD107; TRB100; + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Carbon Steel  DIN EN 1092-1: 2008-09 + AD2000-W9; -W13/TRD107;TRB100 + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 DIN EN 1092-1, Stainless Steel  DIN EN 1092-1: 2008-09 + AD2000-W9; -W2; -W10/ TRD107; TRB100 + Directive 97/23/EG Annex I, Chap. 4.3: 1998-02
 ANSI  ASME B16.5:2003 ASME B16.47:2006

Contact Form

Name

Email *

Message *